7MM-08

Here is a 7mm-08 that we recently completed. It is built off of a Remington Model 7 action, Benchmark 1/10 twist, 3 groove #5 contour barrel finished at 24" that we Duracoated. Glassbedded in a factory laminted stock. It is wearing a Leupold 4x12x40 VX II with A.O. and long range retical.

We finished it just in time for deer season and it should make a great deer rifle..

6BR

Here is a 6BR we built on a new Remington 700 short action. We squared the action and bolt, lapped the lugs, surface ground the recoil lug. The barrel is a Benchmark 1/12 twist 6mm chambered in 6mm BR and finished at 22". The stock is an HS Precision that we glass bedded the action into. It is wearing a Nikon Buckmaster 4.5x14 scope in leupold rings & bases.

The pic of the target shows the first round fired out of the gun which hit to the left at 9:00. The retical was adjusted and 3 more rounds were fired of Hornady 65gr V max and they all three are in the group to the right at 3:00.

We are now on Facebook!

By searching for "Dave's Gunworks" on Facebook, you can now join our group and keep up with the latest photos of rifles built and news you can use!

22 BR

Here is a fast twist 22 BR that we built for a customer and a three shot group that the customer shoot with it. It is a new Remington 700 short action that has been squared, lugs lapped, bolt trued and recoil lug surface ground. Benchmark, 1/8 twist 22 cal. barrel finished at 26 1/2" with a Vais muzzel brake. HS Precision stock, Leupold rings and bases and a Leupold 6.5x20x40mm LR scope with the varmint retical. We bedded the action into the stock and adjusted the trigger to a crisp 2lb pull..

The group was shoot with Lapua cases and Hornady 75gr BTHP match bullets.

Sniper Rifle

Here is a sniper rifle that we just completed for a Police Dept. It is a Rem. 700 short action, HS Precision stock, Benchmark 30cal 3 groove barrel, Duracoated and chambered in 308 win, MIRS M24 scope base, NightForce Scope and rings, Jewell trigger and Harris Bi pod.

After 20 rounds of barrel breakin I returned the next day and fired the group shown above shooting off of the bi-pod. This was the first 3 shot group for the day, one cold bore shot and then two more following it. Ammo used was Federal Gold medal match 168gr BTHP factory ammo.

This is a Xr-100 that we rebarreled (sorry for the poor pic). We squared the action and bolt, lapped the lugs, surface ground the recoil lug, glassbedded the action and installed a 1/8 twist Benchmark barrel and finished it at 28 1/2". Caliber is 6 BR. The customer brought the target by the shop that he shoot at 100 yds, the group is 5 shoots and measuring from outside to outside and subtracting the bullet dia. it measured .015. Very fine shooting on our customers part..

XR-100 204

Here is a 204 Ruger we recently rebarreled for a customer. The action has been squared, recoil lug surface ground, bolt lapped in, action glassbedded, Benchmark 1/11 twist 20 cal barrel finished @ 24" and the barrel has been Duracoated.

This is a sniper rifle we were contracted to build for a Police Dept. It is a Remington 700 short action glassbedded into an HS Precision stock using a Benchmark 3 groove barrel chambered in 308 win, Leupold Mark 4 scope with night vision mount milled into the stock in the forend.
After barrel breakin this rifle shot one group measuring .326 and one measuring .244 at 100 yds using Federal Gold Medal match 168 gr factory ammo.

Here is a switch barrel we built for a customer. It is built off of a Remington 700 long action, Recoil lug has been pinned with two pins into the action. Action has been bedded into a Mcmillian HTG stock. It currently has two barrels, one in 243 win. and one in 22-250 rem. Both barrels and action have been duracoated..

By doing the two pins holding the recoil lug and using a rear entry action wrench we provide you are able to change barrels without taking the action out of the stock..